Features
-
Support multiple communication interface
-
RS-485 (Modbus RTU)
-
Ethernet (Modbus TCP)
-
CAN bus (CANopen)
-
-
Bi-directional kWh metering function for accurate measurement of power consumption and generation data
-
Compact in size and easy to install, suitable for various industrial sites
-
Available with CT for accurate metering, accuracy better than 0.5% (PF=1)
-
Clip-on CT for easy installation
|
|
|||||||||||
|
Single-phase/3 Phases/Multi-circuit Smart Power Meter
|
|||||||||||
| Model | Phase | Loop | Bi-dir. Energy (Note 6) |
CT Included | Max. Voltage | Max. Current | Max. CT ID | Cable Length | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| RS-485 | Ethernet | CAN bus | |||||||||
| Modbus/RTU | Modbus/TCP | EtherNet/IP | CANopen | ||||||||
| PM-3112-xxx | PM-3112-xxx-MTCP | PM-3112-xxx-CPS | Single | 2 | - | Yes | 300 V | 200 A | 24 mm | 1.8 m | |
| PM-3114-xxx | PM-3114-xxx-MTCP | PM-3114-xxx-CPS | 4 | ||||||||
| PM-3112-xxxP | PM-3112-xxxP-MTCP | PM-3112-xxxP-CPS | Single | 2 | - | Yes | 300 V | 200 A | 24 mm | 4 m | |
| PM-3114-xxxP | PM-3114-xxxP-MTCP | PM-3114-xxxP-CPS | 4 | ||||||||
| PM-2133D-xxxP (with LED Display) |
PM-2133D-xxxP-MTCP (with LED Display) |
- | Three | 1 | Yes | Yes | 500 V | 400 A | 36 mm | 4 m | |
| PM-5133-005P (with LCD Display) |
- | - | Three | 1 | Yes | Yes | 500 V | 5 A | 10 mm |
4 m | |
| PM-3033 | PM-3033-MTCP | PM-3033-CPS | Three | 1 | Yes | - | 500 V | 5 A | - | - | |
| PM-3133P | PM-3133P-MTCP | PM-3133P-CPS | Three | 1 | Yes | - | 500 V | 333 mV | - | - | |
| PM-3133-xxx | PM-3133-xxx-MTCP | PM-3133-xxx-EIP | PM-3133-xxx-CPS | Three | 1 | Yes | Yes | 500 V | 400 A | 36 mm | 1.8 m |
| PM-3133-xxxP | PM-3133-xxxP-MTCP | PM-3133-xxxP-EIP | PM-3133-xxxP-CPS | 500 V | 4 m | ||||||
| PM-3133i-xxxP (Note 5) |
PM-3133i-xxxP-MTCP | PM-3133i-xxxP-EIP | PM-3133i-xxxP-CPS | 600 V | 4 m | ||||||
| PM-3133-RCTxxxxP | PM-3133-RCTxxxP-MTCP | PM-3133-RCTxxxP-EIP | PM-3133-RCTxxxP-CPS | Three | 1 | Yes | Yes | 500 V | 4000 A | 185 mm | 4 m |
| PM-4324P | PM-4324P-MTCP | PM-4324P-CPS | Single/ Three |
24/8 | Yes | - | 500 V | 333 mV | - | - | |
| PM-4324-xxxP (1 main circuit) |
PM-4324-xxxP-MTCP (1 main circuit) |
PM-4324-xxxP-EIP (1 main circuit) |
PM-4324-xxxP-CPS (1 main circuit) |
Single/ Three |
24/8 (Note 4) |
Yes | Yes | 500 V | 400 A | 36 mm | 4 m |
| PM-4324A-xxxP (1 or 2 main circuit) |
PM-4324A-xxxP-MTCP (1 or 2 main circuit) |
PM-4324A-xxxP-EIP (1 or 2 main circuit) |
PM-4324A-xxxP-CPS (1 or 2 main circuit) |
500 V | |||||||
| Note 1: Maximum CT cable length can be extend to 8 m. (except for Rogowski Coil CT), and the accuracy does not decrease. [We suggest to use twisted pair cable AWG18-14, sectional area from 0.75 ~ 2.0mm2.] Note 2: The end of power meters with -xxx or -xxxP means the specification of the CT. Users can choose the suitable one based on difference of current range and cable section area. Note 3: The end of power meters with -xxxP, the P means CT has built-in circuit protection to prevent CT from secondary open-circuit danger to human. Note 4: The PM-4324A has 2 separate main circuit inputs that can use in the different power system. Note 5: Built-in AC isolator protection, this means total isolation between the AC measurement side and the control side. Note 6: [Bi-dir. Energy] stands for [Bi-directional Energy]. |
|||||||||||
CT Dimensions (Units: mm)
.jpg)
CT Installation
.jpg)
Power Meter Utility
- By Modbus RTU or Modbus TCP protocol, it enables to connect with ICP DAS Power Meters and data retrieving.
- Real time monitor power measurement values of the meter.
- Real time setting up parameters of the meter.
- Restore the parameters of the meter to default settings.
- Support Data Log function.
CANopen Master Utility
For CANopen master devices, ICP DAS provides a friendly CANopen master utility tool to help users to test and set CANopen slave devices easily. This utility tool can function as a simply CANopen master tool for controlling CANopen devices on the CANopen network. It provides several functions, such as NMT protocol, SYNC protocol, EMCY protocol, SDO protocol, PDO protocol, and so forth.
It features:
1. Auto-scan all the CANopen master that the CPMUtility has supported.
2. Auto-scan all the CANopen slave devices on the CANopen network.
3. Support EDS file.
4. Dynamic PDO object setting easily.
5. Node Guarding Event and Heartbeat Event detection.
6. EMCY message receiving.
7. Maximum 5 SYNC message producers per CANopen master.
8. Support I-8123W, I-87123, PISO-CPM100(U), I-7565-CPM and PISO-CAN/ PEX-CAN/PCM-CAN CPM Libraryfor version 2.00 later.
9. Support OS: WinCE5.0/CE6.0/XPe and Win2K/XP/Vista/732-bit system.
