About WISE
WISE is an Intelligent Web-based Multi-functions PAC controller designed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI interface that allows you to implement control logic on controllers just a few clicks away; no programming is required. With this powerful and easy-to-use software, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
System Architecture
Through Web browser, you can access Web Server on WISE to perform tasks such as logic rule edition and download. WISE equips an IF-THEN-ELSE rule engine that will check whether the rules are valid or not and determine the execution of actions under specific conditions, for examples: setting up I/O channel values, perform scheduled and Timer tasks, sending Email under a specific condition. In addition, through the Modbus TCP/RTU protocol and SNMP protocol, it enables SCADA software or SNMP Management software to control and monitor I/O channel or system status on controllers in real time. The following is the system architecture diagram and description of each series of controllers and modules:
IIoT Edge Controller: WISE-52xx / WISE-224x Series
WISE-523x/WISE-224x provides more supports in I/O functions in addition to merits inherited from WISE series controllers. It supports XV-board; allows connections to I-7000 I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together. The wide range of selection options enables the flexibility in I/O module integration to meet the requirements from various applications. WISE-523x/WISE-224x provides Data Logger function to record the I/O channel data by periodic cycle or event trigger. And it allows to send the data files by FTP or Email to the control center.
In addition to the CGI command sending function, WISE-523x/WISE-224x now supports the CGI command receiving function that allows the network devices to trigger the operation of IF-THEN-ELSE logic rule of WISE-523x/WISE-224x by Ethernet. The well thought-out CGI command functions make WISE-523x/WISE-224x being able to interact with the devices flexibility in the network environment. WISE-523x/WISE-224x supports SNMP V2c protocol and the SNMP Trap operation to work with the SNMP Network Management software. It also supports the MQTT protocol to connect with the MQTT broker for the message publishing and subscribing mechanism, and the connection with the IoT service which Microsoft Azure and IBM Bluemix provide.
Additionally, WISE-523x/WISE-224x provides to send messages to the instant messaging APP: LINE. The flexible integration ability with the SCADA and IT software (or devices) and the reliable ability of real-time I/O logic control make WISE-523x/WISE-224x the most cost-effective I/O controller in the IoT (Internet of Thing) Age.
Advanced IIoT Edge Controller: WISE-284x Series
WISE-284x is equipped with iMX8 cpu module, which can meet the requirements of low power consumption and high performance computing power for the embedded system, and are competent for the complex operations of edge computing and data logging. WISE-284x also can store a large amount of log data and image data with the eMMC memory and MicroSD expansion slot that can be expanded to 2TB.
In order to meet the requirement of high level information security protection of the IoT (Internet of Things) system, WISE-284x provides a variety of encrypted communication protocols as below. With the HTTPS protocol supported by WISE-284x, users can securely access the WISE web page without worrying about the setting being stolen. Through the SNMP v3 protocol, WISE-284x can be perfectly integrated with the IT and Network management system. Users can securely download data log files stored from WISE through SFTP and FTPS protocols. In each communication protocol WISE supports, users can set up the relevant protection password or encryption certificate respectively. In addition, WISE-284x supports the setting of blacklist and whitelist, which allows users to filter and block the specific domains. WISE-284x also support the dynamic blacklist function to automatically add the IPs which try to login WISE and get failure many times to the blacklist to prevent the controller from the attack of password cracking. With the equipped VPN function, WISE-284x can connect to devices in a specific secure network domain to completely isolated from the threats of information security outside.
WISE-284x provides supports in I/O functions. It supports XV-board; allows connections to I-7000 I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together. The wide range of selection options enables the flexibility in I/O module integration to meet the requirements from various applications. WISE-284x provides Data Logger function to record the I/O channel data by periodic cycle or event trigger. And it allows to send the data files by FTP or Email to the control center.
In addition to inherit the features from the original WISE series controllers, WISE-284x Advanced version IIoT Edge Controller also provides many advanced functions. About the Internal Register, WISE-284x still support the 32-bit data format and the editing of mathematical formula, but add the new data formats such as 64-bit long, Double and String, and all Internal Register support the “Retain Variable” mechanism. For the floating-point sensor data which WISE get from sensor, user can set up its decimal point to 1~4 digits for the SCADA software interfaces to provide the flexibility for the appearance and accuracy of the sensor data.
In the integration with network devices, WISE-284x provides CGI command sending and receiving functions for the two-way interaction with IP Camera or other programs; WISE-284x also supports MQTT protocol to connect with MQTT Broker for message publish and subscribe operations. In addition, WISE-284x supports the communication operation with the Instant Messaging Sending Software such as LINE and WeChat, which can send the messages to the LINE accounts and WeChat accounts user assign.
In the integration with Cloud Platform, WISE-284x can connect to the IoT services of Amazon Web Services, Microsoft Azure and IBM Bluemix cloud platforms. It also can integrate with the IoTstar Cloud Management software provided by ICP DAS. Based on the powerful integration capabilities with IT/IoT network environment, it make WISE-284x series modules as the best IIoT Edge controller in the IoT Age.
WISE Features
- IF-THEN-ELSE logic rules execution ability
WISE equips with an IF-THEN-ELSE logic Rule Engine; it offers IF-THEN-ELSE rules for you to set up the logic content. After completing rule edition and downloading rules to the WISE controller, the Rule Engine will loop execute the rules in order under specific conditions.
- No programming is required to implement logic content on controllers
WISE provides user-friendly Web UI pages for editing control logic on the controllers. It enables to implement logic edition by a few clicks on the mouse to set up and deploy logic rules without writing a single line of code.
- No extra software tool is required; all operations can be done through the Web browsers
Provides Web-based HMI interface runs on regular Web browsers. To edit control logic, it only requires a browser to connect to the Web server on WISE. No extra software tool installation is needed on the target PC.
- Support various I/O Modules
WISE allows to connecting with a wide range of the ICP DAS I/O modules as XV-Board, I-7000 modules, M-7000 modules, (P)ET-7000 modules, WISE-7100 modules, WF-2000 modules and tM/DL/LC/IR/iSN series modules. In addition to these ICP DAS modules, WISE also allows to connect with devices that support Modbus RTU/TCP Slave protocol for I/O monitoring. The ability to connect with various types of I/O modules enables flexibility and scalability for system implementation and allows to meet various requirements from the clients that enable to find best solutions to meet the requirements. that enables to find best solutions to meet the requirements.
- Connection with IP Camera
WISE allows connections to ICP DAS iCAM IP Camera series. Users can trigger the connected IP camera to perform snapshot or video recording with IF-THEN-ELSE logic rules. WISE provides the IP Camera Status webpage to display the event list ordered by time, and you can just click and play the images or videos on the browser. In additional, WISE provides remote backup mechanism to upload images and videos to the remote FTP server automatically.
- Data Logger function
With the microSD card, WISE provides Data Logger function to real-time record the I/O data of the controller. The Data Log files can be sent to the FTP server or the Email address for users, or user can actively download them from the FTP client utility or Web page for further administration management or data analysis.
- Internal Register (Perform Math formula, Retain Variable, String processing)
All models of WISE provides Internal Registers function; WISE-284x / WISE-52xx / WISE-224x Internal Registers can be used to hold temporary variables and perform math operation. About the math formula performing, it supports to insert I/O channels to be the variables, and use the operators such as plus “+”, minus “-”, times “*”, divide “/”, superscript “^”, left parenthesis “(” and right parenthesis “)” to complete the editing of formula. Users can edit different formula in each Internal Register, then WISE will calculate the results of all formulas repeatedly, and save the results into the corresponding Internal Registers for IF-THEN-ELSE rule checking or data logging. Internal Register also provides “Retain Variable” mechanism. It means the data inside the Internal Registers can be retained even the WISE is in Power Off status. In addition, WISE-284x Internal Register also supports the String editing operation. The result of the string editing of the Internal Register can be used as the content for the WISE's E-mail and Instant Message sending functions.
- Provide Timer and Schedule operation
WISE features two kinds of timing functions: Timer and Schedule. It allows you to perform specific tasks such as time delay, or schedule specific date or time for control logic execution. To ensure the accuracy of the WISE controller clock, it also has the ability to sync the clock to an SNTP time server for time synchronization through the network.
- Provide Email Alarm message sending function
WISE supports Email alarm message sending function. Email is the important function for real-time message communication. The sending action can be added to the logic edition as part of logic control to provide real-time message transmission in response to specific events. The SSL/TLS authentication is provided by WISE-284x / WISE-52xx / WISE-224x.
- Provide CGI Command Sending and Receiving functions
CGI command function is an important function for real-time message communication in network environment. WISE supports fully CGI command operations as CGI command sending and CGI command receiving. The CGI command sending action can be added to the logic edition as part of logic control in response to specific events. The CGI command receiving function let WISE can receive the CGI command from others network devices. The content of CGI command receiving can be used in IF condition statements to trigger the THEN/ELSE actions.
- Real-time monitoring system status of controllers
WISE supports Modbus TCP/RTU Protocol for you to perform real-time monitoring and control of the controllers. WISE also provides an easy-to-view HMI web interface for real-time monitoring. It allows you to get important real time system information even without SCADA software. Besides Modbus TCP/RTU Protocol, WISE-284x / WISE-52xx / WISE-224x supports SNMP V2c protocols and WISE-284x supports SNMP V3 protocols, and provides the IF-THEN-ELSE rule setting to trigger the SNMP Trap sending. It makes the integration between the Network Management software (and device) and WISE to be easier.
- Password protection for access control
WISE HMI web page offers password protection. After getting in the webpage, you will be required to input the password before editing logic rules. In addition, WISE provides monitoring web pages specifically designed for cell phone. The access control restricts the access to the webpage to prevent unauthorized modification; it allows to set up passwords for Administrator, User and Guest; only the authorized users will be allowed to review the setting, change the setting or modify the channel data.
- HTTPS, SFTP, FTPS encrypted communication protocols support
WISE-284x supports the encrypted communication protocols such as HTTPS, SFTP, FTPS, etc. It allow users to set up the secure communicatoin channel for the data transmission of web pages content, sensor data and system information with WISE.
- VPN function support
WISE-284x supports 4 VPN protocols such as PPTP, L2TP, OpenVPN and SoftEther. By using the functuion, users can set up WISE to operate in a secure closure network domain to protect WISE and the sensors it connect from the intrusion of the external threats.
- Active I/O Sending function
In addition to the Modbus TCP/RTU Slave function that enables SCADA software (or HMI device) to poll the I/O channels value of the WISE, now WISE provide the function “Active I/O Sending” for users. Based on the “Active I/O Sending” function, WISE can send the I/O channels value of the controller actively to SCADA software (or HMI device) by event trigger (I/O channel value changed) or periodic cycle. This function will improve the efficient of the data communication between WISE and SCADA software (and HMI device).
Please note: The SCADA software (or HMI device) must equip the Modbus TCP Slave function to receive the I/O channels data sent by WISE.
- MQTT Message Publish/Subscribe operation
WISE supports the MQTT protocol. It can publish the I/O data of the I/O module which connect to WISE to the MQTT broker, and receive the message content of the Subscribe MQTT Topics which is published by others MQTT device for the data logging operation or using it in the IF-THEN-ELSE logic rule.
- Connection with IoT Cloud Platform
WISE support the connection ability with the IoT Cloud Platform. It work as the concentrator in the IoT application to connect with Sensors and I/O modules, collect and transfer the I/O channel data to the Cloud platform for future data analysis. WISE also can receive the message which is published from the Cloud platform for the corresponding actions at the field side.
| WISE-284x | Support Amazon Web Services / Microsoft Azure / IBM Bluemix |
| WISE-52xx / WISE-224x | Support Microsoft Azure / IBM Bluemix |
Please Note: The Amazon Web Services / Microsoft Azure / IBM Bluemix IoT Cloud Platform connecting function of WISE is based on MQTT protocol. If the Amazon Web Services / Microsoft Azure / IBM Bluemix ends or modifies the MQTT connection service, the Amazon Web Services / Microsoft Azure / IBM Bluemix IoT Cloud platform connecting function may risk not being able to work appropriately.
- Connect with IoTstar Cloud Management Software
WISE supports the connection with IoTstar Cloud Management software developed by ICP DAS. Through the function of IoTstar, the sensor data and image files uploaded from WISE can be automatically imported and integrated, and the remote monitoring dashboard can be easily created to perform the remote monitoring and maintenance operation.
- Mobile network connection
WISE-2841M-4GE / WISE-2841M-4GC / WISE-523xM-3GWA / WISE-523xM-4GE / WISE-523xM-4GC support Mobile Network communication. With the 3G/4G SIM card, it can send the data logger files and Email alarm message back to the control center by Mobile Network.
- Provides SMS command receiving function and alarm notification function
WISE-2841M-4GE / WISE-2841M-4GC / WISE-523xM-3GWA / WISE-523xM-4GE / WISE-523xM-4GC / WISE-5801 / WISE-5801-MTCP equip SMS command receiving and alarm message notification function. It allows to include SMS alarm sending action into logic rules to send a pre-set SMS message to related personnel when an event occurs. In addition, the controllers allow to receive the SMS commands sending by specific phones numbers to perform tasks such as real-time channel monitoring, channel data modification and logic rules execution (triggered by SMS), etc.
- Provide LINE Notify message sending function (This service will end on March 31, 2025.)
WISE-284x / WISE-52xx / WISE-224x supports to send LINE messages to the LINE personal account or group chat room. The LINE message sending function can be triggered by IF-THEN-ELSE rules. The LINE message content could be a preset string with realtime I/O channel data, or a snapshot via the connected IP camera.
- Provide LINE Messaging API Message Push Function
WISE-284x / WISE-52xx / WISE-224x supports sending LINE Messaging API push messages to personal or group chat rooms. Users can trigger message sending through IF-THEN-ELSE rules, and the message content can include real-time I/O channel data.
- Provide Telegram message sending function
WISE-284x / WISE-52xx / WISE-224x supports sending Telegram messages to the Telegram personal account or group chat room. The Telegram message sending function can be triggered by IF-THEN-ELSE rules. The Telegram message content could be a preset string with realtime I/O channel data, or a snapshot via the connected IP camera.
|
|
|||||||||||||
|
WISE-284x / WISE-224x / WISE-52xx Series
More hardware and software specifications, you can find on Comparison List. |
|||||||||||||
| Model | Communication | SMS | HTTPS VPN Firewall SFTP FTPS |
SNMP |
Instant Messaging app
|
Connect with public Cloud platform |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ethernet | 3G System | 4G System | v2c | v3 | LINE | Telegram | Microsoft Azure IBM Bluemix |
Amazon Web Services |
|||||
| Advanced IIoT Edge Controller: WISE-284x Series | |||||||||||||
| WISE-2841M
|
2 | - | - | - | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| WISE-2841M-4GE
|
2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| WISE-2841M-4GC
|
2 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| IIoT Edge Controller: WISE-224x Series | |||||||||||||
| WISE-2241M
|
2 | - | - | - | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-2246M
|
2 | - | - | - | - | Yes | - | Yes | Yes | Yes | Yes | - | |
| IIoT Edge Controller: WISE-52xx Series | |||||||||||||
| WISE-5231
|
1 | - | - | - | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-5231M
|
1 | - | - | - | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-5231M-3GWA
|
1 | Yes | - | Yes | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-5231M-4GE
|
1 | Yes | Yes | Yes | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-5231M-4GC
|
1 | Yes | Yes | Yes | - | Yes | - | Yes | Yes | - | Yes | - | |
| WISE-5236
|
1 | - | - | - | - | Yes | - | Yes | Yes | Yes | Yes | - | |
| WISE-5236M
|
1 | - | - | - | - | Yes | - | Yes | Yes | Yes | Yes | - | |
| WISE-5236M-4GC
|
1 | Yes | Yes | Yes | - | Yes | - | Yes | Yes | Yes | Yes | - | |
| Type Name | Advanced IIoT Edge Controller |
IIoT Edge Controller | Intelligent I/O Module | ||||
|---|---|---|---|---|---|---|---|
| Controller/Module Name | WISE-284x | WISE-52xx | WISE-224x | WISE-580x | WISE-71xx WISE-72xx |
WISE-75xx | |
  |
  |
 |
 |
  |
 |
||
| Hardware Specification | |||||||
| CPU | Quad-core ARM CPU, 1.6 GHz/Core |
32bits (1GHz) |
32bits (1GHz) |
16bits (80MHz) |
16bits (80MHz) |
32bits (400MHz) |
|
| Ethernet Interface | 10/100/1000 Base-TX × 2 |
10/100/1000 Base-TX × 1 |
10/100/1000 Base-TX × 2 |
10/100 Base-TX × 1 |
10/100 Base-TX × 1 |
10/100 Base-TX × 2 Ethernet Switch for Daisy-Chain |
|
| MicroSD Interface | Yes (Max. 2 TB) |
Yes (Max. 32 GB) |
Yes (Max. 32 GB) |
Yes (Max. 32 GB) |
- | - | |
| I/O Module Supported |
Local | XV-board | XV-board | XV-board | XW-board | Built-in I/O | Built-in I/O |
| Remote | DCON module and Modbus RTU module (RS-485) Modbus TCP module (Ethernet) |
DCON module and Modbus RTU module (RS-485) Modbus TCP module (Ethernet) |
DCON module and Modbus RTU module (RS-485) Modbus TCP module (Ethernet) |
WISE-580x I-7000 module or Modbus RTU module WISE-580x-MTCP Modbus TCP module |
- | - | |
| IP Camera | iCAM module (Up to 12) |
iCAM module (Up to 4) |
iCAM module (Up to 4) |
- | - | - | |
| Software Specification: Basic Function | |||||||
| Rule Configuration Webside |
Yes (Support HTTPS) |
Yes | Yes | Yes | Yes | Yes | |
| SNTP Time Synchronization |
Yes | Yes | Yes | Yes | - | Yes | |
| VPN | Yes | - | - | - | - | - | |
| Firewall | Yes | - | - | - | - | - | |
| DDNS | Yes | Yes | Yes | - | - | - | |
| I/O channel monitoring and control |
Yes | Yes | Yes | Yes | Yes | Yes | |
| Trigger IP camera snapshot or video |
Yes | Yes | Yes | - | - | - | |
| IF-THEN-ELSE Logic Rule |
Yes (Unlimited) |
Yes (Unlimited) |
Yes (Unlimited) |
Yes (36 Set) |
Yes (36 Set) |
Yes (72 Set) |
|
| Recipe | Yes (Unlimited) |
Yes (Unlimited) |
Yes (Unlimited) |
Yes (12 Set) |
Yes (12 Set) |
Yes (24 Set) |
|
| Data Logger | Yes (More sets) |
Yes (More sets) |
Yes (More sets) |
Yes (1 Set) |
- | - | |
| Timer | Yes (Unlimited) |
Yes (Unlimited) |
Yes (Unlimited) |
Yes (12 Set) |
Yes (12 Set) |
Yes (24 Set) |
|
| Schedule | Yes (More powerful) |
Yes (More powerful) |
Yes (More powerful) |
Yes (12 Set) |
- | Yes (24 Set) |
|
| Internal Register | Amount | 100 Set | 200 Set | 200 Set | 48 Set | 48 Set | 48 Set |
| Retain Variable |
Yes | Yes | Yes | - | - | - | |
| Math Formula |
Yes | Yes | Yes | - | - | - | |
| 64-Bit Numerical |
Yes | Yes | Yes | - | - | - | |
| String Processing |
Yes | - | - | - | - | - | |
| Ping | Yes | Yes | Yes | - | - | - | |
| Advanced P2P | - | - | - | - | Yes (8 Set) |
Yes (8 Set) |
|
| Software Specification: Integration with SCADA/IT/IoT Systems | |||||||
| Connect with SCADA | Yes (Modbus TCP) (Modbus RTU) |
Yes (Modbus TCP) (Modbus RTU) |
Yes (Modbus TCP) (Modbus RTU) |
Yes (Modbus TCP) (Modbus RTU) |
Yes (Modbus TCP) |
Yes (Modbus TCP) |
|
| Active I/O | Yes (Modbus TCP Master) (MQTT Publish) (SNMP Trap) |
Yes (Modbus TCP Master) (MQTT Publish) (SNMP Trap) |
Yes (Modbus TCP Master) (MQTT Publish) (SNMP Trap) |
Yes (Modbus TCP Master) |
- | Yes (MQTT Publish) |
|
| Wireless data communication |
3G | Yes WISE-2841M-4GE WISE-2841M-4GC |
Yes WISE-5231M-3GWA WISE-523xM-4GE WISE-523xM-4GC |
- | - | - | - |
| 4G | Yes WISE-2841M-4GE WISE-2841M-4GC |
Yes WISE-523xM-4GE WISE-523xM-4GC |
- | - | - | - | |
| SMS | Yes WISE-2841M-4GE WISE-2841M-4GC |
Yes WISE-5231M-3GWA WISE-523xM-4GE WISE-523xM-4GC |
- | Yes WISE-5801 WISE-5801-MTCP |
- | - | |
| Email Sending | Yes (Support SSL/TLS) |
Yes (Support SSL/TLS) |
Yes (Support SSL/TLS) |
Yes (No Security) |
Yes (No Security) |
Yes (No Security) |
|
| LINE Sending |
Yes | Yes | Yes | - | - | - | |
| Telegram Sending |
Yes | Yes | Yes | - | - | - | |
WeChat Sending  |
Yes | Yes WISE-5236 Series |
Yes WISE-2246M |
- | - | - | |
| CGI Command | Sending | Yes (More powerful) |
Yes (More powerful) |
Yes (More powerful) |
Yes | Yes | Yes |
| Receiving | Yes | Yes | Yes | - | - | - | |
| FTP | Client | Yes (Support SFTP/FTPS) |
Yes | Yes | Yes | - | - |
| Server | Yes (Support TLS Encryption) |
Yes | Yes | - | - | - | |
| SNMP | Yes (Support v2c/v3) |
Yes (Support v1/v2c) |
Yes (Support v1/v2c) |
- | - | - | |
| MQTT Client | Yes (Support SSL/TLS) |
Yes (Support SSL/TLS) |
Yes (Support SSL/TLS) |
- | - | Yes (No Security) |
|
| IoTstar supported | Yes | Yes | Yes | - | - | - | |
| Connect with public Cloud platform |
Yes (Amazon Web Services) (Microsoft Azure) (IBM Bluemix) |
Yes (Microsoft Azure) (IBM Bluemix) |
Yes (Microsoft Azure) (IBM Bluemix) |
- | - | - | |
WISE-284x / WISE-224x / WISE-52xx Series I/O Modules Support Specification
| I/O Module Support | Description | Amount | |
|---|---|---|---|
| Local I/O Module | Local Bus | ICP DAS：XV-Board series module | 1 |
| Remote I/O Module | DCON by RS-485 | ICP DAS：I-7000/DL series module | Up to 16 modules (Each COM Port) |
| Modbus RTU by RS-485 | ICP DAS：M-7000/tM/DL/CL/DLW/LC/IR/iSN series module. Others：The modules which support the Modbus RTU Slave Protocol. |
||
| Modbus TCP by Ethernet | ICP DAS：WISE-7100/(P)ET-7000/WF-2000/DL/CL/DLW/IR/iSN series module. Others：The modules which support the Modbus TCP Slave Protocol. |
Up to 16 modules | |
| IP Camera | HTTP by Ethernet | ICP DAS：iCAM series module | WISE-52xx / WISE-224x: Up to 4 cameras |
| WISE-284x: Up to 12 cameras |
|||
WISE-284x / WISE-224x / WISE-52xx Series I/O Module Supported List
※ If the module name is marked in gray, it means that module has been phase out.
※ If the module name is marked with (52), it means that module only support WISE-52xx / WISE-224x.
※ If the module name is marked with (28), it means that module only support WISE-284x.
Monitoring System for Ranch
In the environment of the ranch, due to the ranches generally consist of large areas, it is necessary to collect the sensor information from all over the ranch through wireless technology, and it also requires to remotely control the equipment located everywhere of the ranch, so that the operator can adjust the suitable environment parameters according to the factors such as weather, temperature and humidity to help the growth of the livestock and the crop.
WISE-5231M-4GE can work with the ZT-2550/ZT-2551 Zigbee wireless communication module to collect the temperature and humidity information throughout the ranch and detect rain through the rain detector. If the rainfall intensity is too high or rainfall is too much, it can be covered by the electric retractable curtain automatically or manually via the WISE5231M-4GE. WISE also supports LINE message sending. It can be used with scheduled function to send messages to report the current status of the equipment and environment of the ranch, or to send the alarm notification message to the manager for immediate response when a special event occurs. Based on the function WISE-5231M-4GE provided, it can provide convenient and real-time management mechanisms for the manager of the ranch and reduce loading of the task.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
| ZT-2550 | RS-232/RS-485 to ZigBee Converter (ZigBee Coordinator) |
| ZT-2551 | RS-232/RS-485 to ZigBee Converter (ZigBee Router) |
| DL-100TM485 | IP66 Remote Temperature and Humidity Data Logger with LCD Display (RS-485) |
| M-7055 | 8-ch Isolated DI (Dry, Wet) and 8-ch Isolated DO (Source, PNP, 10~40 VDC) Module |
Community Fire Alarm System
Hydrant equipment is an indispensable part of the Community/Home security system. Nowadays, most communities are equipped with the Hydrant equipment. However, most of the Hydrant equipment is old version and has no Internet connection function. If we can improve the functionality of the Internet connection for these Hydrant equipment, then the real-time information of the sensor and the status of the Hydrant equipment can be sent to the Internet Cloud system, the manager of the Hydrant system can receive the real-time alarm notification through the mobile phone at anytime and anywhere, and then also can control the operation of Hydrant equipment remotely to avoid or reduce the damage. It will increase the reliability of the Community/Home security system.
WISE-5231 supports the Modbus RTU protocol, which can be connected to the Central Control Host of the Fire Detector to get the real-time information, control the Hydrant equipment, and it can also work with a smoke detector to enhance the fire detection capability. The distributed WISE-5231 in different areas of the community can transmits the sensor data of Hydrant equipment to the IoTstar Cloud Management software for data collection and analysis. With the IoTstar Bot Service, when the fire is detected, the Bot Service will send the alarm notification message to the mobile phone of the duty officer by LINE App. The duty officer also can check via the LINE App to see if the on-site Hydrant equipment has been activated or not. If not, the Hydrant equipment can be activated through the LINE App in real time. It provides convenient and immediate community safety management mechanism.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
| IoTstar | Industrial IoT application software (For remote monitoring and management of the WISE/PMC/PMD controllers) |
| IoTstar Bot Service | Optional package for IoTstar; support LINE App |
Tunnel Monitoring System
The security maintenance in a tunnel is a tough work and it is time sensitive. For it always requires to monitor a wide range of areas in the tunnel, if all monitoring jobs only rely on manual operations when a disaster happened, it might cause delays and lead to huge losses. WISE controller allows to connect to various I/O modules and is able to response to the emergency in real-time. In this case, the WISE controllers are installed in various segments in the tunnel and are connected to smoke/temperature sensors, warning lights, sprinklers, ventilation fans and other equipment. The logic rules that in response to emergency situations could be pre-set in WISE controllers, and when smoke and high temperature are detected, the fire fighting procedures will be triggered; the sprinklers will be automatically turned on to put out the fire; the ventilation fans will be started to take away the smoke; and will turn on the warning lights and open the security doors to guide people in the tunnel away from the emergency scene. The related information will be gathered in back-end control center, and will send out notification to all controllers in all segments of the tunnel for traffic control and management.
-
Benefit
- WISE controller allows to connect with ICP DAS I-7000 modules and Modbus RTU modules; therefore enables to control various I/O devices at the same time. Via RS-485, WISE is able to connect to remote I/O modules all over the place; offering flexible deployment options for on-site wiring.
- WISE controller is equipped with IF-THEN-ELSE logic setting function. The logic Rules can be easily implemented via web page interface. And after the settings are completed, it allows to perform real-time monitoring for the on-site status and be able to immediately response to the emergency situations.
- Support Modbus TCP / RTU Protocol, enables to connect with SCADA software in control center for data aggregation.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
Greenhouse Automation Solution
Greenhouse cultivation represents a very important role in modern agriculture. As the greenhouse usually is equipped with various high-tech equipment, management tend to be very complex. A fully automated greenhouse control systems bring obvious benefit such as labor saving, but far more importantly, it enables improved quality of produce and information gathering that will make difference between earning a profit or suffering substantial losses.
WISE allows to connect to various I/O modules for thermocouple inputs that allow real-time monitoring of the temperature and humidity in the greenhouse; the DO module can be connected to various greenhouse facilities. It will real-time detect the greenhouse status and in response to sensors connected; the control system will automatically adjust vent position, fans, heating, fogging, shading, lighting, irrigation frequency, irrigation nutrient levels and CO2 levels, etc. WISE controller will tirelessly monitor the key environmental factors that affect crop quality and will make constant changes that a grower could not possibly achieve the same consistency level. In addition, WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes real time monitoring of the overall status for each greenhouse more efficiently.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
| I-7016D | 2-ch 4-wire Strain Gauge Input Module with LED Display |
| I-7018 | 8-ch Thermocouple Input Module |
| I-7050 | 7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module |
Disaster Prevention System
In factories, most facilities and devices involved are all subject to overheating damage. From improper site wiring, lightning strikes, to overrun motors, a wide variety of overheating issues threaten systems and peripherals constantly. To ensure the safety of personals/devices, eliminate unnecessary machine downtime and achieve maximum productivity, it is necessary to build an automated system that enables real-time monitoring and disaster prevention.
WISE controller provides a total solution for disaster prevention/monitoring system that will detect temperature for various devices in the factory in real time. It also enables communication between devices that will initiate immediately actions in response to emergencies. For example, in response to pre-set critical temperature threshold, the system will take actions such as auto-stop the devices, turn on the temperature reduction devices, and send alarm notification to the related personnel. WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes response to emergencies and real time monitoring of the overall factory operation more efficiently.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
- WISE-7118Z features PoE (Power over Ethernet) that eliminates the requirement for the dedicated electrical outlets and reduces complicated wiring. With PoE switch, it enables the ability to send electrical power over Ethernet cables.
- WISE-7118Z is equipped with AI channels that allow individual inputs of voltage, current, or thermocouple, it also features 240V AC high-voltage protection.
| Related Products | |
|---|---|
| WISE-7118Z | Intelligent I/O Module with 10-ch Thermocouple Input and 6-ch DO |
Unmanned Facility Room Monitoring System
As the advance in science and technology development, the power system and the network system have become essential parts of modern life. No matter in the buildings, factories, or even outdoors, there are always control rooms with devices installed for power and network management and control. Due to the control rooms are always filled with all kinds of expensive devices and usually under high loading operations; the monitoring of temperature and humidity, and power consumption management become important issues for the whole system.
WISE can be used for monitoring the unmanned facility room. WISE allows to connect to ICP DAS I/O modules and Modbus slave modules; therefore it is able to connect with thermometer, hygrometer, air conditioner, warning devices and power meters. Logic rules for daily regular maintenance in the control room can be set on WISE controller, such as:
- When the room temperature is getting too high and being detected, the air conditioning equipment will be turned on and a real-time alarm message will be sent to related personnel.
- Set up the rotation schedule for air conditioning devices to take turns operating to ensure the air conditioning devices won’t be damaged due to prolonged operation.
- If an air conditioning device is detected to be damaged, the back-up air conditioning will be turned on for redundant operation and a real-time alarm message will be sent to related personnel.
In addition, it allows to connect to WISE controller by SCADA software to perform the control, monitoring and collection of the I/O channel data of the facilities. And the power consumption of facilities in the control room can be statistically calculated in order to manage the electricity usage and cost as well.
-
Benefit
- WISE is able to connect with ICP DAS I-7000 modules and Modbus RTU modules, it allows to control more I/O ports and supports a wide variety of I/O devices. One WISE controller is enough to complete the monitoring of all devices in the control room.
- WISE controller allows to set up logic rules for 24 hours control room maintenance and monitoring; provides immediate response to the emergency situation and saves manpower.
- The two-way SMS communication capability of WISE enables to send message automatically to the related personnel, furthermore, the related personnel could send message to the WISE to remotely set up the output value for a specific channel.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
Environment Management System
As the advance of civilization causing heavy industrial and commercial activities, there are growing concerns about environmental issues; among them, wastewater treatment is one of the most emphasized areas for it involves complicated process and considerable number of devices needed during operations. In order to achieve reliable, high-performance, efficient and cost-effective result, automation approaches are essential to wastewater treatment solutions.
ICP DAS WISE controllers features realtime monitoring and reliable Alarm notification function that is perfect for use in wastewater treatment applications. It takes only a few clicks to configure logic control that enables automation and optimization of wastewater treatment operations, such as: auto-detect the level of the sedimentation tank and response immediately based on the wastewater level. For example, when the wastewater level drops, the floodgate will be opened to load wastewater to desired level; and if the wastewater accumulates in the tank reaches a certain level, it will start the pumps to process treatment until the level decreases. In addition, WISE controller also allows sending Alarm notification message regarding current water level to the related personnel for immediately response.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
- WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
- WISE is equipped with reliable SMS function that allows real-time notifying related personals via SMS for immediate response.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
Production Line Management
Eliminating unnecessary machine downtime, ensuring maximum productivity and maint a ining appropriate stock are keys to successful product line management. WISE controller features flexible logic functions and is an easy-to-learn and easy-to-use tool for creat ing cutting edge applications that makes it easy to take full control of your product line management.
ICP DAS offers full-range I/O modules that works with WISE controller that enables to connect with product line devices in various applications. The logic engine on controllers make it possible to set up different automation process by just a few clicks, for example: by connecting conveyer to WISE controllers, it allows to hold the conveying of semi-finished product during the manufacturing process for further processing; measure productivities statistics, or notify the operators ready for next steps. In addition, WISE controller can also be set to detect and response immediately when an error occurs during the manufacturing process to avoid the waste of raw materials or equipment damage. WISE controller also support Modbus and IoT protocols so that information can be instantly transmitted to the control center and makes real time monitoring the overall production line status more efficiently.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
- WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
Parking Area Guiding System
As the numbers of vehicles increasing year by year, parking becomes a global issue especially in dense urban area. In addition to providing adequate number of parking spaces, it’s also crucial to optimize the use of parking spaces by guiding drivers quickly finding vacant spaces within a parking facility.
ICP DAS WISE controller, together with the I-7055 digital I/O modules distributed all over the parking facility, offer a total solution that is perfect for large-scale parking facilities. With help of sensors and lights installed on each space, the system will guide drivers directly to the vacant parking spaces signified by auto-lighting flashing light. In addition, with DI Counter function, it is capable of producing occupancy statistic, trend and flow rates, etc., for analyses and reports. WISE also support Modbus TCP; the I/O information received by on-site controllers will be transmitted to control center in no time, therefore, achieves real time monitoring and remote management for entire parking facility.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
- WISE controller is equipped with schedule function that enables automatically shut down equipment to save electricity during off-hours or at any scheduled time.
- I-7000 Series I/O modules features distributed control, expandable and simple wiring; it is especially suitable for large-scale systems.
| Related Products | |
|---|---|
| WISE-523x/WISE-224x | Intelligent IIoT Edge Controller |
Fire Alarm Linked System
When a fire burns out in a building, not only the people near the fire scene need to pay attention to the emergency situation but all people in the building should be notified with the latest update. With the advanced P2P function of WISE, a linked alarm system can be easily built. Put 6 WISE-7152 modules in six regions of this area, the DI channels of each WISE-7152 module are connected to temperature/smoke detectors and emergency switches, and the 6 DO channels will be connected with the 6 warning lights (each warning light for a region). When the WISE-7152 in F region detects fire, it will send out the warning via the advanced P2P function to share the information. All warning lights represent F region on the 6 WISE-7152 distributed in the 6 regions will be turned on to notify everyone in the building that a fire is happening in F region. By knowing the exact fire scene location will help to guide people the accurate direction to leave the fire scene. After the problem in F region being solved by related personnel, press the emergency switch to turn off the alarm, the alarm in all 6 WISE-7152 will be turn off at the same time.
In addition to the 6 WISE-7152 distributed in various regions, another WISE-7152 could be installed to monitor the network status of all 6 WISE-7152 modules. Through the sharing information ability of advanced P2P function, this WISE-7152 will communicate with the other 6 WISE-7152 modules regularly, and the light indicators of the 6 DO channels on this WISE-7152 will show the network status of the 6 WISE-7152 modules. The operator could easily verify the network status of each module in this fire alarm linked system by the indicator and could quickly find and fix the module with no response.
-
Benefit
- WISE-71xx series features advanced P2P function, multiple WISE modules could share channel information via network in real-time and could response immediately.
- By using Ethernet as the communication network for the entire system and with the POE feature WISE supported allows to reduce wiring.
- Without the use of a complex SCADA system, it allows to show the operating status of the whole system by the indicators and easy to perform maintenance.
| Related Products | |
|---|---|
| WISE-7152 | Intelligent I/O Module with 8-ch DI and 8-ch DO |
Cleanroom Management System
Cleanroom personnel are an important source of cleanroom contamination. To ensure the cleanliness of the cleanroom, in addition to high standard quality hardware, it also requires a well-designed personnel access control system to guarantee full control of all access attempts. ICP DAS WISE controller is perfect for managing access control and enables remote monitoring and control of all access attempts to the cleanroom in real time.
ICP DAS WISE-7144 is equipped with 8 DI and 8DO providing integration with various devices for receiving or sending digital signals. The Logic Rule Engine on the WISE controller enables easy configuration for various management processes. For example, connect WISE-7144 with IP Camera for access control, it allows the IP Camera (via CGI Command sending) to real time record the images of the workers before opening the outer door to the clean zone. After the outer door is shut, the workers enter the clean zone and get in the air shower chamber. At this time, WISE-7144 is able to start the air shower; the built-in Timer function makes it easy to define the shower time interval. After the shower is done, the inner door will be opened for the workers to move from the clean zone to the cleanroom. At the same time, WISE-7144 also allows to connect to the positive-pressure sensor and the access control security system for monitoring all access attempts or space management. WISE-7144 also supports Modbus TCP interface so that the information can be instantly transmitted to the control center and makes real time monitoring of the overall status of the cleanroom more efficiently.
-
Benefit
- WISE controller features IF-THEN-ELSE logic Rule Engine that enables implementing logic configuration via Web Page just a few clicks away, no programming is required.
- Support Modbus TCP Protocol that enables seamless integration with SCADA software.
- WISE-7144 features PoE (Power over Ethernet) that eliminates the requirement for the dedicated electrical outlets and reduces complicated wiring. With PoE switch, it enables the ability to send electrical power over Ethernet cables.
- WISE-7144 controller is equipped with Timer function that enables the evaluation of timeout conditions, and allows to start or stop the Timer.
- WISE-7144 controller is equipped with CGI Command function, in response to certain events, it allows to sending CGI commands for enabling the CGI process executions on the remote controllers such as IP Camera.
| Related Products | |
|---|---|
| WISE-7144 | Intelligent I/O Module with 8-ch DI and 8-ch DO |
WISE-284x + IP Camera + Instant Messaging app live demo
-
The following live demo demonstrates a WISE-2841M connecting to an IP camera (iCAM-MR6422X).
-
By inputting different passwords, you can login with different authority either as an administrator or a guest.
- Please note: When you login the page, if you receive the “Administrator is already logged in” message, it mean someone is using the demo now, please try it again later.
(Click on the picture above to enter the demo website.)
WISE-52xx + IP Camera + Instant Messaging app live demo
-
The following live demo demonstrates a WISE-5231 connecting to an IP camera (iCAM-760D).
-
By inputting different passwords, you can login with different authority either as an administrator or a guest.
- Please note: When you login the page, if you receive the “Administrator is already logged in” message, it mean someone is using the demo now, please try it again later.
(Click on the picture above to enter the demo website.)
Please follow the steps below to try using Telegram to send a message with snapshot:
- Scan the QR code below to join the Telegram chat room for the demo.
Live demo for the Telegram chat room
-
Login the online demo web page of the WISE and get into the “Channel Status” page; change the “Demo Switch” status to “ON”, then you will receive the message with a snapshot in the Telegram chat room.
IoTstar
free trial for 3 month
Sign Up Now
"IoTstar Trial" Introduction
IoTstar is a software developed by ICP DAS for WISE/PMC/PMD controllers in a variety of Industrial IoT applications. Using IoTstar to build the IoT Cloud system, it can provide the following major services:
- Controller Remote Access Service: Status Monitoring, System Setting, and Firmware Update for WISE/PMC/PMD controllers.
- Sensor Data Collection Service: Sensor data collected and imported into Database at cloud.
- Sensor Data Visualization Service: Review sensor data through Dashboard interface.
- Sensor Data Report Service: Review sensor data through statistical report.
- Bot Service with Mobile Phone: Query and monitor sensor data by mobile phone Bot service.
During the IoT Cloud system development, there is no-programming-required, and the system setting can be completed only through the web interface operation. In addition, through the SQL command, IoTstar can be quickly integrated with the Cloud platforms, data analysis tools (Power BI, Google Data Studio or SCADA system etc.) to help users quickly build the "IoT + Big Data" Cloud application. For more information about IoTstar IoT cloud management software, please refer to IoTstar official website.
WISE/PMC/PMD users are welcome to experience the benefits of building a cloud IoT system through the "IoTstar + WISE/PMC/PMD" solution-the "IoTstar Trial" provided by ICP DAS. Users only need to complete the account application for "IoTstar Trial", and then can use the WISE/PMC/PMD controller at hand and the “IoTstar Trial” provided by ICP DAS to actually perform the IoT cloud-based operations for WISE/PMC/PMD controllers.
WISE/PMC/PMD users are welcome to experience the benefits of building a cloud IoT system through the "IoTstar + WISE/PMC/PMD" solution-the "IoTstar Trial" provided by ICP DAS. Users only need to complete the account application for "IoTstar Trial", and then can use the WISE/PMC/PMD controller at hand and the “IoTstar Trial” provided by ICP DAS to actually perform the IoT cloud-based operations for WISE/PMC/PMD controllers.
Advantages of "IoTstar Trial"
There are several reasons why you should get a personal trial account to evaluate IoTstar.
- Free of charge: The trial is free, and without obligation of purchase.
- No worry: The trial is your personal trial account and you can return to your trial account to continue the operation anytime. Feel free to take your time for the trial without worrying about someone else may access your account and change the data you previously set.
- Privacy protection: Only you can access the information you have entered.
- Full function usage: You get a full version of IoTstar so that you can test and use any specific function you need. You are free to alter the settings in IoTstar, and you can thus see exactly how the program would work for your IIoT application.
