********************************************************************************************
The modulename.ini (XWmodulename.ini) file is used by the WinPAC_utility.exe to recognize a
new module connected to the WP-8000 (WP-5000).
Add the new module definition to the modulename.ini file so that the new module will be 
recognized by the WinAPC_utility.exe program and the module name will be shown on the Testbox 
slot of the utility.
********************************************************************************************

Format:
============================================================================================
[A]
ModuleType=B
ModuleName=C

A:the new module HardwareID (Hex)
B:the new module Type
C:the new module Name 


ModuleType:
Other       ->7
DI32        ->1
DO32        ->2
DI16DO16    ->3
DI16        ->4
DO16        ->5
DI8DO8      ->6
=============================================================================================

Example:
=============================================================================================
If the new module name is 8122C and the module type is 32 channel DI, the Hardware ID is 0x1A. 
Enter the data in the modulename.ini file and the WinPAC_utility will then provide support for 
the new module.
=============================================================================================

[1A]
ModuleType=1
ModuleName=8122C

