The 8410/8810 User Manual is released now.
It is focus on application of RS-485 Networks using DCON protocol , there are many pictures which lead user how to setup the system step by step.and there are detail examples to show how to use DCON SDK to develop user's applictions.

The Subjects of 8410_8810_User_Manual are list below:
1. General Hardware specification and Features introduction.
2. The installation and wire connection of Hardware .
3. The introduction and wiring of Frame Ground.
4. The instroduction of RS-485 Network and applicatons and how to use DCON Utility to configure the I/O modules.
5. The introduction of DCON Protocol and the applications using related SDK Tool Kits.
6. How to update the OS image and Download the firmare via MiniOS7 Utility.

Download url:
File location at CD:
CD:\NAPDOS\DCON\8410_8810\Documents\8410_8810_User_Manual.pdf
 
 
The 8430/8830/8KE4/8KE8 User Manual is released now.
It is focus on application of Ethernet Netowrk using VxComm technic with DCON protocol, there are many pictures which lead user how to setup the system step by step. and there are detail examples to show how to use DCON SDK to develop user's applictions.
The Subjects of 8430_8830_8KE4_8KE8_User_Manual are list below:
1. General Hardware specification and Features introduction.
2. The installation and wire connection of Hardware.
3. How to use Configure Wizard to establish of IP Network and use DCON Utility to Configuration of I/O modules.
4. How to use VxComm Utility to create the Virtual COM Ports and promote the Serial application to Ethernet and can communicate with the I/O modules on I-8000E system.
5. The introduction of DCON Protocol and the applications using related SDK Tool Kits.
6. How to update the OS image and Download the firmare via MiniOS7 Utility.

Download url:
CD:\NAPDOS\DCON\8KE4_8KE8\Document\8430_8830_8KE4_8KE8_User_Manual.pdf
 
 
I-7188E series firmware V3.2.23 is updated now

The I-7188E series firmware provides the Vxcomm technique for the I-7188E series modules.

The previous version of the firmware is V3.0.09. After nearly two years of constant modify and test, we make effort for the firmware to be more stable and more user-friendly. The latest version of the firmware releases the more functions and fixes some bugs that the changes only the most important ones are being listed below.

Supported Modules:

I-7188E1(D), I-7188E2(D), I-7188E3(D), I-7188E3(D)-232, I-7188E4(D), I-7188E5(D), I-7188E5(D)-485, I-7188E8(D), I-7188EA(D), I-7188EX(D)

Fix:

  • Fix Hardware flow control bug which the RTS cannot work correctly.
  • Fix command set bug.
  • Remove the invalid debug message output to COM port.
  • Fix the Timer function bug.
  • Change the LED blinking in the different echo mode. M0 is in the original mode (ON 0.5 sec, OFF 0.5 sec), and M1 is ON for 0.1 sec, OFF for 0.1 sec and then ON for 0.1 sec, OFF 0.7 sec
  • Fix the bug that the system crash by WDT while the Ethernet cable has be removed, and the LED on i7188E will blink for 5 times per second while the Ethernet cable has be removed.

Add:

  • Web configuration function (TCP port:80)
  • Telnet function (TCP port:23)
  • DHCP function
  • New command line options: /Y, /Z, /SI, /SO, /SC and /COM
  • Allow the command line options to save in the Vcom.ini which can be automatically loaded while i7188E reboot
  • Please refer ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188e/tcp/vxcomm/doc/ for more details about firmware history and the new function.

I-7188E series firmware is located on ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188e/tcp/vxcomm/server(7188e)/

 
 
I-7188E SDK is also updated

 
Copyright©1983-2004 ICP DAS Co., Ltd. All Rights Reserved