I-7565M-FD
USB to 2-port CAN/CAN FD Bus Converter
Features
- Compatible with USB 2.0 (High Speed)
- Compatible with the ISO 11898-2 standard
- Compatible with CAN specification 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO (Bosch) standards switchable
- CAN FD bit rates for data field from 100 kbps to 10000 kbps
- Support CAN Bus message filter configuration
- Time stamp resolution 1ms.
- Voltage supply via USB
- Watchdog inside
- Built-in dip-switch to select 120 ohm terminal resister for CAN Bus
- Support firmware update via USB
- Provide utility tool for users module setting and CAN Bus communication testing conveniently
- Provide API library for user program development
Introduction
I-7565M-FD is a USB to CAN/CAN FD (CAN with Flexible Data-Rate) converter with two CAN channels. It allows transmitting/receiving CAN/CAN FD frames and supports CAN2.0A/2.0B and CAN FD (ISO/Bosch) specifications and different baud rates for CAN/CAN FD frame. (10 kbps to 1000 kbps for CAN arbitration phase and 100 kbps to 10000 kbps for CAN FD data phase). When connecting I-7565M-FD to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN Bus network easier and quicker by applying I-7565M-FD. The application fields can be CAN Bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The following is the application structure for the USB to CAN/CAN FD module. The PC can be the CAN host, monitor or HMI to access/control the CAN/CAN FD devices through the CAN network by the I-7565M-FD Converter. The module let users to communicate with CAN/CAN FD devices easily from PC with USB interface.
Applications
Flexibly integrates diverse communication devices to meet the control and monitoring needs of various industries.
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| Software | |
|---|---|
| SDK | C#.Net, VB.Net, VC++.Net, Linux |
| LED Indicators | |
|---|---|
| Status | 1 x Power 1 x Module status 4 x CAN status |
| USB | |
|---|---|
| Specification | USB 2.0 High Speed (480Mbps) |
| Connector | 1 x USB (Type B) |
| Driver | Built-in Windows 7/8.1/10/11 |
| CAN | |
|---|---|
| Ports | 2 |
| Specification | ISO 11898-2, CAN 2.0 A/B and FD |
| Baud Rate | CAN bit rates: 10 k ~ 1 M bps, CAN FD bit rates for data field: 100 k ~ 10M bps (*Note1) |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler |
| Terminal Resistor | DIP switch for the 120 Ω terminal resistor |
| Filter | Yes |
| Receive Buffer | 128 data frames |
| Data Flow | 3000 fps for Tx/Rx (Total CAN ports) |
| Power | |
|---|---|
| Input Range | USB power delivery |
| Consumption | 1.5 W |
| Mechanical | |
|---|---|
| Casing | Metal |
| Dimensions (mm) | 111 x 102 x 27 (W x L x H) |
| Installation | Wall Mount |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specification Memo
Note1: The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,...), but it can also not be reached.
- Provide CAN Bus baud rate / acceptance filter configuration
- Easily transmit/receive CAN/CAN FD messages for testing and display the time-stamp of each received CAN/CAN FD message
- Provide saving the CAN/CAN FD message as “TXT” file for data log
- Provide sending CAN/CAN FD message by using the internal timer of module for high precision transmission
- Check / Reset module status remotely and get current CAN/CAN FD messages flow
