Introduction:

In recent years, due to global fisheries have been overfished, the marine resources is getting depleted rapidly. The development of capture fisheries is getting limited and the aquaculture production continues to be fast growing for being eco-friendly and sustainable. With the advances in technology and rising labor costs, greater levels of automation such as monitoring of environment in water temperature, oxygen content and pH value, etc. are gradually introduced into aquaculture production applications to reduce cost and improve the production. By using WISE-5801, you can always monitor the aquaculture ponds and perform routine control operations in accordance with the schedule. In addition, WISE-5801 is equipped with SMS sending function (for alarm report) and SMS command receiving function. Even in the absence of network connection, it still can perform two-way interactions to implement tasks in real-time.



 

Description:

For most aquaculture usually involves high stocking density, to avoid the death of aquaculture species due to lacking of oxygen, not only it requires using water pumps for water circulation to maintain water quality, it also requires water tankers aerators to increase the oxygen saturation. In this application, ICP DAS WISE-5801 is connected to water pumps and water tankers aerators, by using the Schedule function of WISE-5801, the aerators are set to start at 10:00 and stop at 17:00 daily for routine automatic aeration operations. When there is an unusual event or damage occurs, WISE-5801 will send SMS message to notify the operators for immediate response to the emergency and real-time maintenance. The operators can also send out SMS commands to WISE-5801 to start the water pumps and increase the pressure to produce more splashing water to increase oxygen saturation as an emergency alternative arrangement so that it won’t cause massive death of the aquaculture species due to the malfunction of aerators. In addition, WISE-5801 can be connected to various devices such as temperature sensors or water quality sensors to monitor and record various status of the aquaculture ponds in real-time. And by setting IF-THEN-ELSE logic rules, it can immediately inform the operator when unusual events occur such as low temperature or unusual PH value measurement. By using WISE-5801, it will dramatically reduce the losses due to unexpected accidents and enhance the functionality of the entire aquaculture system.

 

Product:

WISE-5801
In addition to merits inherited from the existing WISE series, WISE-5801 even provides more supports in I/O functions. It allows connections with a wide range of XW-Boards, I-7000 / M-7000 Remote I/O modules and Modbus RTU slave devices that enables users to freely choose the most suitable I/O modules. With the microSD card, it provides Data Logger function to real-time record the I/O data of the controller and send the data files by FTP or Email to the control center at a scheduled time for further administration management or data analysis. WISE-5801 also features SMS sending function for alarm report and SMS command receiving function to perform two-way interactions with the operators in real-time.

 

Benefits:

• No programming is required to implement system logic settings.
• Build up a system immediately; it will dramatically reduce the time and labor spent on system development.
• Built-in IF-THEN-ELSE logic rules execution engine
• Support ICP DAS XW-Board, I-7000/M-7000 modules and standard Modbus RTU Slave modules for I/O channel monitoring
• Support Counter, Timer, Schedule, Email sending and Recipe functions
• Support Data Logger and data log files send back function
• Support Modbus TCP/RTU protocol for seamless SCADA software integration.
• Support SMS message alarm sending and SMS command receiving function

For more WISE product information, please refer to web page:
https://www.icpdas.com/en/product/WISE-5801