home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8041
 
F-8041
32-channel Isolated Digital Output Redundant Module
 
 
~ NEW ~
Model: F-8041
 
  • 32 digital output (sink) channels
  • Safety value (Preset/Hold)
  • Power-on(Initial) value
  • Output channel LED indication
  • RoHS compliance
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • Fast redundant switching time (<100us)
 
The F-8041 is a digital output module with 32 NPN channels. The output channel of F-8041 is a current sinking channel and can drive the load up to 0.5A current. The digital output channels offer LED to indicate digital output status. Moreover, the module offers 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages the channels, the system (backplanes, other modules, and control unit) won't be affected because the benefit of isolation.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Feature
Redundant Yes (Switching time < 100us)
Termination board break off detection Yes
Safety output Yes (Preset/Hold)
Power-on (Initial) output Yes
LED indicator 1 RUN, 1 ACT, 1 DUX
32 as channel 0~31 status
Digital Output
Channels 32 (NPN)
Type Current sinking, Open-collector
Rated voltage 36 VDC
Output load current Singel channel 2mA to 500 mA
Maximum of total channels 4.5 A
Output switching time 100 us
Output impedance 2 Ω
Isolation 3000 VDC
Certification
EMC EN61000-6-2, EN61000-6-4
IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board DN-DO-16DR-A, DN-DO-16DR-B, DN-DIO-M
Maximum power consumption 2.1 W @ 24 VDC
Operating temperature -25 °C ~ +75 °C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30mm x 85mm x 115mm
 
F-8041 CR 32-channel Isolated Digital Output Redundant Module (Gray Cover)(RoHS)
 
DN-37-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-DIO-M Termination board for digital I/O modules
DN-DO-16DR-A &
DN-DO-16DR-B
Termination board for digital output with power relay
CA-3710AM 1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM 2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM 3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM 5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM 10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player