home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O

home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8017C1

F-8017C1
8-channel Isolated Current Input Redundant Module

~ NEW ~

Model: F-8017C1


8 current input channels Overrange measurement RoHS compliance 3000 VDC isolation from input to backplane 3000 VDC isolation from input to frame ground Redundancy Fast redundant switching time (<100us)

The F-8017C1 is a 16-bit, 8-channel analog differential input module. This module accepts current input range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for some application. The F-8017C1 provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Feature
Redundant	Yes (Switching time < 100us)
Over-Current Protection	Yes
Termination board break off detection	Yes
LED indicator	1 RUN, 1 ACT, 1 DUX
Analog Input
Number of channels	8
Type	4 ~ 20 mA (Support ±25% overrange
Maximum Allowable Input Current	25 mA
Resolution	16 bit
Sampling Rate	500 Samples/sec(Total)
Accuracy	±0.05% FSR
Zero Drift	±20 μV/°C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	230 Ω
Data Range	-2500~12500 (0 ~ 24 mA)
Isolation	3000 VDC
Certification
EMC	EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board	DN-AIO-M
Maximum power consumption	1.5 W
Operating temperature	-25°C~ +75°C
Humidity	5 ~ 95 % RH, Non-condensing
Weight	300 g
Dimensions (W x L x H)	30 mm x 85 mm x 115 mm

F-8017C1 CR

8-channel Isolated Current Input Redundant Module (Gray Cover)(RoHS)

DN-37-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-AIO-M	Termination board for analog I/O modules
CA-3710AM	1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM	2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM	3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM	5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM	10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D	DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D	DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。