home > product> solutions > industrial ethernet switch & fiber switch > Selection Guide

home > product> solutions > industrial ethernet switch & fiber switch > Selection Guide > NSM-206PSE/NSM-206PF Series

NSM-206PSE
6-port 10/100 Mbps PoE(PSE) Ethernet
NSM-206PF Series
4-port 10/100 Mbps PoE(PSE)Ethernet with 2 fiber ports Switch

~ Available soon ~	~ Available soon ~	~ Available soon ~

Model: NSM-206PSE	Model: NSM-206PFT	Model: NSM-206PFC/NSM-206PFCS

The NSM-206PSE/NSM-206PF series Switch is 6-port unmanaged Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-206PSE/NSM-206PF series switch enable centralization of the power supply, providing up to 30 watts. The NSM-206PSE/NSM-206PF can be used to power IEEE 802.3af/at standard devices (PD).

4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
Up to 30 watts per PoE port
Supports operating temperatures from -40 °C ~ +75 °C
Full duplex IEEE 802.3x and half duplex backpressure flow control
Power input 12~57 VDC wide range redundant power inputs
Broadcast Storm protection
Automatic MDI/MDI-X crossover for plug-and-play
DIN-Rail Mounting, Wall Mounting (optional)

Models		NSM-206PSE	NSM-206PFT	NSM-206PFC	NSM-206PFCS
Technology
Standards		IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
Processing Type		Store & forward; wire speed switching
MAC Addresses		2048
Frame Buffer Memory		768 Kbit
Interface
RJ-45 Ports		6 x 10/100 Base-TX	4 x 10/100 Base-TX
POE Pinout		V+ (pin 1, 2), V-(pin 3, 6) for Port1 ~ Port4
Fiber Ports		-	2 Port 100 Base-FX (SC/ST connector)
LED Indicators		PWR1, PWR2, POE, Link/Act and Speed
Ethernet Isolation		1500 Vrms 1 minute
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode	NSM-206PFT NSM-206PFC	Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm
Single-Mode	NSM-206PFCS	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm
Power
Input Voltage Range		12 ~ 57 VDC Redundant dual Input
Power Consumption		0.15 A @ 24 VDC without PD loading, 5.8A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDCwithout PD loading, 2.9A @ 48VDC with PD full loading (30W per ports)
Power reverse polarity protection		Yes
Connector		4-Pin Removable Terminal Block
Mechanical
Casing		Metal
Dimensions (W x L x H)		28 mm x 150 mm x 119 mm
Installation		DIN-Rail, wall mounting (optional)
Environment
Operating Temperature		-40 °C ~ +75 °C
Storage Temperature		-40 °C ~ +85 °C
Ambient Relative Humidity		10% ~ 90% RH, non-condensing

NSM-206PSE	6-port 10/100 Mbps PoE(PSE) Ethernet Switch (RoHS)
NSM-206PFT	Multi-mode, ST Connector, 4-port 10/100 Mbps PoE(PSE) with 2 Fiber ports Switch (RoHS)
NSM-206PFC	Multi-mode, SC Connector, 4-port 10/100 Mbps PoE(PSE) with 2 Fiber ports Switch (RoHS)
NSM-206PFCS	Single-mode, SC Connector, 4-port 10/100 Mbps PoE(PSE) with 2 Fiber ports Switch (RoHS)

SDR-240-24

24 V/10 A, 240 W Single Output Industrial DIN Rail Power Supply with PFC Function

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。

這個頁面上的內容需要較新版本的 Adobe Flash Player。