|
|
|
|
|
|
ENCODER300
ISA Bus, 3-axis Encoder Interface Card |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ENCODER300 is a 3-axis quadrature encoder interface board for the IBM PC/AT
bus compatibles. For each encoder, phase 0, phase 90 and index pulse
inputs are provided. Inputs may be single ended (A,B,C) or differential
(A+, A-, B+, B-, C+,C-). power and ground connections are provided for
encoder use if needed. Inputs are conditioned by a four-stage digital
filters. The maximum input rate in quadrature decode mode is 1 MHz. The
conditioned input are applied to a 16-bit counter. The counter may be
used for quadrature decoding, pulse-input and direction-input counting, or
as a pulse input up/ down counter. |
|
|
|
|
|
|
|
|
|
|
- Accepts Inputs from Incremental or Quadrature Encoders
- 3 Independent Axis
- Max. Quadrature Input Frequency: 1 MHz
- Counts per Encoder Cycle: X1, X2, X4 (Software selectable)
- Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction
|
|
|
|
|
|
|
|
|
|
|
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
|
- Toolkit for LabVIEW 2000/XP
- Toolkit for LabVIEW NT
- Toolkit for LabVIEW 95/98
- Driver for LINUX
|
|
|
|
|
|
|
|
|
|
|
- Encoder Type: Single-ended or differential
- Logic Levels: TTL, CMOS compatible
- Power Consumption: +5 V @ 500 mA
|
|
|
|
|
|
|
|
|
|
|
ENCODER300 |
ISA Bus, 3-axis Encoder Interface Card
Include: CA-PC25M (25-pin Male D-sub Connector with Plastic Cover) |
|
|
|
|
|
|
|
|
|
DN-25 |
I/O Connector Block with 25/9 pin D-sub Connector (DIN-Rail Mounting) |
|
|
|
|
|
|
|