home > product> solutions > remote i/o modules/units > DL Series > DL-100T485/DL-100T485-W
 
 
DL-100T485/DL-100T485-W
IP66 Remote Temperature and Humidity Data Logger with LCD Display
 
~ NEW ~ ~ Available soon ~  
  • Temperature and Humidity Data Logger Module
  • Provides LCD Display
  • Humidity Range: 0 % ~ 100 % RH
  • Humidity Resolution: 0.1 % RH
  • Temperature Range: -20 °C ~ +60 °C (limited by LCD Display)
  • Temperature Resolution: 0.1 °C
  • Baud Rate is only 9600 bps
  • Full IP66 Dust/protected against powerful jets of water
  • RS-485 communication interface
 
Model: DL-100T485 Model: DL-100T485-W  
 
Humidity and temperature Data Logger Module is essential in many Factory, Building , Home and Remote Diagnosis .The DL-100T485 provide valuable information on the levels and variation of humidity and temperature module. The Humidity Resolution is 0.1 % RH, temperature Resolution is 0.1 °C. It contains a single built-in RS-485 communication interface and an LCD indicator to display the module ID. The LCD display can be constantly changing the temperature and humidity, allowing users to understand the latest messages. The DL-100T485 is to conform IP66 Dust/protected against powerful jets of water. The Data Logger Utility is included to install, confi gure, retrieve and showreading data in powerful chart and export to Excel.
 
 
Humidity & Temperature Sensor
Humidity Range 0 ~ 100% RH (Relative Humidity)
Humidity Resolution 0.1% RH
Humidity Accuracy Typical: ±3% RH
Max.: Refer to Figure 1
Humidity Repeatability ±0.1% RH
Temperature Range -20 ~ +60 °C
Temperature Resolution 0.1 °C
Temperature Accuracy Typical: ±0.4 °C
Max.: Refer to Figure 2.
Temperature Repeatability ±0.1 °C
Data Logging
Data Storage Capacity 4092 Readings (16000 bytes Memory)
Sampling Frequency 10 seconds to 24 Hours
Recording Mode Stop on memory full or continuous recording with memory rollover
LCD Display
LCD Duty 1/4 (Refer to Figure 3)
LCD Bias 1/3 (Refer to Figure 3)
LCD Operating Voltage 3.0 VDC (Refer to Figure 3)
LCD Operating Frequency 64 Hz (Refer to Figure 3)
Power
Protection Power reverse polarity protection
Required Supply Voltage +10 ~ +30 VDC
Power Consumption ≦ 0.15 W @ 24 VDC
Connection 2-Pin 3.81mm Fixed Connector
Mechanical
Dimensions (W x L x H) 82 mm x 126 mm x 55 mm
Waterproof Level IP 66
Installation DIN-Rail; Wall mount
Environment
Operating Temperature -20 °C ~ +60 °C (Protection rating IP66)
Required Supply Voltage -30 °C ~ +80 °C (Protection rating IP66)
Input Impedance 100% RH for Operating Temperature -20 °C ~ +60°C
Communication
Interface 2-wire RS-485 (DATA+, DATA-); Non-isolation
Baud Rate 9600 bps
   
Figure 1: Maximum RH-tolerance at 25°C per sensor.
Figure 2: Maximum T-tolerance per sensor.
 
Figure 3
 
DL-100T485 CR IP66 Remote Temperature and Humidity Data Logger with LCD Display (RoHS)
 
Power Supply 24 VDC Power Supply
tM-7561 CR USB to Isolated RS-485 Converter (RoHS)
I-7520 CR Isolated RS-232 to RS-485 Converter (RoHS)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player